Compounds

Heavy Cut+ Compound

Ewocar Heavy Cut+

Available capacities

250ml. – 1000 ml.

If you are looking for a professional grade product for professional grade results then this is a great choice! Works with dual-action or rotary polishing machines.

This mixture is not classified as hazardous in accordance with Regulation (EC) No. 1272/2008. Safety data sheet available on request.

Ewocar Heavy Cut+ is an upgraded cutting compound with increased cutting rate and extended buffing cycle when using rotary and dual-action machine polishers on higher speeds. The new advanced water-based formula is capable of cutting through the defects faster and cooler without dust on the surface. In combination with Ewocar Premium Wool / Wool White or FlexiWool it can safely and quickly remove up to P800 sanding marks. On softer paint you may need to follow up with a Fine Cut to clear the remaining haze and provide deep rich gloss to your paintwork. After the polishing cycle simply wipe off the polished area with a clean microfiber towel in a slow circular motion. Recommended speed for rotary polishing machine varies from 800 to 1500 RPM or speed 4 to 6 for dual-action machine polishers. Ewocar Extra Heavy Cut is silicone and fillers free making it a true cutting compound

LONGER & COOLER | BETTER CUT & FINISH | ADVANCED FORMULA – LOW DUST TECHNOLOGY

Heavy Cut Compound

Available capacities

250ml. – 1000 ml.

If you are looking for a professional grade product for professional grade results then this is a great choice! Works with dual-action or rotary polishing machines.

This mixture is not classified as hazardous in accordance with Regulation (EC) No. 1272/2008. Safety data sheet available on request.

Ewocar Heavy Cut was designed to remove heavy paint defects while leaving exceptional gloss. Highly efficient diminishing abrasive paste formula combined with Ewocar Wool White pad can safely remove up to P1000 sanding marks and other heavy imperfections from paint, on soft or sticky paint use with Ewocar Microfiber pad. On softer paint you might need to follow up with a lighter polish like Ewocar Fine Cut to clear the remaining haze and provide deep rich gloss to your paintwork. After the polishing cycle simply wipe off the polished area with a clean Ewocar microfiber towel in a slow circular motion. 

Ewocar Heavy Cut is water-based with low dust technology inside which allows for a longer buffing cycles without drying out prematurely like other compounds. Ewocar Heavy Cut is silicone and fillers free making it a true heavy correction compound.

2in1 One Cut One Step Compound

Available capacities

250ml. – 1000 ml.

If you are looking for a professional grade product for professional grade results then this is a great choice! Works with dual-action or rotary polishing machines.

This mixture is not classified as hazardous in accordance with Regulation (EC) No. 1272/2008. Safety data sheet available on request.

It is a perfect solution for a busy detailing shops where not only speed matters but also and precision! In a just one single polishing cycle you will be able to restore gloss and bring back clarity to any old and varnished paint surfaces. Ewocar 2in1 One Cut easily removes up to P2000 sanding marks and also removes light to moderate scratches, swirl-marks & holograms, leaves the paintwork surfaces extremely glossy, swirl-free and smooth to the touch. After a polishing cycle we highly recommend to wipe off the polished are with a clean Ewocar Microfiber Cloth in a slow circular motion. If you are still not satisfied with the results you can repeat the process until the desired finish will be achieved.

2IN1 ONE CUT COMPOUND – WATER BASED

It means that it has a low dust technology inside which allows for longer buffing, polishing cycles. We recommend speed for dual-action polishing machines varies from 3 to 5 and for a rotary polishing machines we recommend staying within 800-1200 RPM range.

2IN1 ONE CUT COMPOUND – SILICONE AND FILLERS FREE

Silicone and fillers free therefore it is safe to use on a vehicle that will be coated afterwards – we highly recommend to use one of the Ewocar coatings Boost+, Hydro36 ). If you are looking for a professional grade product for professional grade results then this is one of the best choices for you!

Fine Cut Compound

Available capacities

250ml. – 1000 ml.

If you are looking for a professional grade product for professional grade results then this is a great choice! Works with dual-action or rotary polishing machines.

This mixture is not classified as hazardous in accordance with Regulation (EC) No. 1272/2008. Safety data sheet available on request.

Ewocar Fine Cut compound was designed to use with Burgundy Special Finishing Pad to safely remove holograms and haze left from initial heavy cut but with its unique diminishing abrasive paste formula it is capable of removing swirls and light scratches leaving extremely deep gloss and haze free finish on your paint in just one step. In order to achieve a better rate of cut combine Fine Cut compound with Ewocar Red Medium or Microfiber pads.

 

Ewocar Fine Cut is water-based, silicon free and with a low dust technology inside which allows for a long buffing cycles and easy wipe-off on softer paint.
Ewocar Fine Cut is silicone and fillers free making it a true correction compound